Working Principle of UV lamps

Key Facts About UV Radiation and the Formation of• UV lamp Main Operating PrinciplesElectric current through the electrodes pass through the metal vapor discharge lamp. Cathodes, electrons (negative charge) or gas metal atoms colliding electrons spread rise higher energy level. The reaction of collisions with electrons immediately after the completion of radiation energy as they begin to spread. Determining the energy spectrum of radiation is contained in the rebate during the discharge pressure is a determining factor as the metal vapor and gas.• Low Pressure Mercury Vapour UV lamps Home Study FactorsThe pressure of several tons, low pressure mercury vapor discharge lamp, while the reaction of mercury mainly 184.9 nm (185nm) and 253.7 nm (254nm) wavelengths of radiation, but with a choice of different short wavelength of the quartz tube can be prevented dissipation. Wavelengths below 200nm decomposition of oxygen (oxygen is converted to ozone). As a result, the structure of the quartz tube, ozone-producing UV lamp or an important factor in determining the non-producing property to have.High and low pressure mercury vapor lamps disinfect the work is so special about them are very obvious differences. 4cm-150cm long, only 4 for a lamp - a 400Watt power supply range is needed. Some low pressure UV lamps, cold plate electrodes (cold cathode emitters) are performed, some people pre-heat treated (hot cathode emitters) have been active electrodes' are made. In essence cold cathode emitters creates less UV radiation. UV Disinfection procedures for you to get busy with UV dosage we recommend the use of hot-cathode emitters.Low pressure emitters had been burned almost immediately after the maximum level of radiation begins to spread. Low-pressure mercury vapor (low vapor pressure) to be working again very quickly, thanks to ready position after extinguishing the gelirler.Low ateşlenip pressure lamps operate at room temperature to the optimum. Room temperature above and below the lamps which are adapted for places.Medium Pressure lamps, a significant increase in the difference, the dosage of mercury in all mercury discharge has not used the extra time with each, and, furthermore, the ignition and spread of the formation of the fluorescent tube from start to finish during the final electrical arc between the electrodes, there is no limit.These lamps are suitable for running power sources are needed. This choke and ignitor or electronic transformer may be a combination, may account for preferred because of their advantages provided by electronic transformers.• Medium Pressure Mercury Vapour UV lamps Home Study FactorsIf a metal vapor or gas discharge lamp operation from 10 to 20 bar, medium pressure lamps, lamps of this kind happens in this case (as he was called previously, these lamps are high pressure) is called.Medium pressure UV lamp with the main components that make up:• fluorescent tube• A fused-in electricity supply• Electrodes• Gas• MercuryProduced through different stages depending on the application of gas is injected into the quartz tubes. In general, the argon or the mixture of different gases. Pre-calculated and the UV lamp operating voltage determines the injected mercury. In addition to the heavy metal iodide (iodide) to create or mercury spectrumlarındaki spectrumları focused on the points used to fill in the gaps.Foil electrodes and extensions of the fluorescent tube is pressed into the heat of fusion of melt processing and electrical connection, the extension is provided with a tight-knit. Preferably on the voltage applied to electrodes amps limitleyen a conductiveden arc between the electrodes to create the internal gas iyonizeleştirip ısıtacaktır tube to a certain extent.Ignition voltage (approximately 1.7 times the operating voltage) ignition and then again during the fall and rise directly up to 10-50 volts. As a result, many oscillation reaction in the process of mercury and mercury molecules in Vapourise undergoes changes. This process continues until the reaction reached completion, and the electrical values. Electricity when the power source to be ionized gas in the lamp will begin to create from the arc voltage should be determined and the amount of mercury is rising up to the value of certain amount of amps is limited by the power supplies. At the same time after ignition amps predetermined operating level drops (approximately 1.6-fold).Ready during the first ignition of the lamp voltage rise and fall amps until it shows the location of a discharge lamp to the electrical characteristic feature of acceleration values. Based on the foregoing, during firing of the lamp to reflect light from the outside can not be seen in the arc. Arc is captured, but the optimum operating conditions and can be seen in two elektrodtada completed. If the (lamp), or a nominal conditionslar impurities discharge vessel is not reached in this case the arc electrodes can not be fixed and will vary continuously. If a lamp operating voltage in this case, it should be soğutuluyorsa too low to be observed, such as the parameter values ​​of the lamp base can be taken to ensure the optimum operation conditions. In such cases, the minimum power of the lamp where the arc is completely cut off loaded (lamp may be disabled).Due to the high pressure and temperature inside the lamp goes out again immediately after the burn, because it will not be the collision of electrons between the electrodes is not the formation of the arc. Vapor pressure of the lamp is lit the lamp again fall will be arrested in its own specific initial value.Ampere is always required before starting the lamp ignition voltage and the values ​​achieved in flawless condition.

Read more »

UV lamp and Uses

Technical Fields in which the UV lamps are used?
UV Curing (UV ink, lacquer, adhesive, resin, and components such as Potting)
• Furniture Industry (chair, table, kitchen cabinets), the production of door and ski equipment.• Printing industry: in particular, label, offset, flexo, silk screen printing and other areas, such as newspaper and banknotes.• CD and DVD production.• Electronic industry: production of PCBs.• Automotive industry: synthetic resins and curing windscreenleri repair.UV Disinfection (Air, Water and Surface)
• drinking water: Water tanks, beverage producers, from the network of drinking water for cleaning in homes, hotels and commercial enterprises, protection of water used.• Business Areas: Water-cooling channels, algae control, fish farms, before the evacuation of used water.• Waste Water: Waste water filtration units to disinfect.• Air Disinfection: hospital, bank, shipping, public transport is very crowded regions such as the people spread through the air that can cause disease by killing micro-organisms to keep to a minimum.• Before filling Packaging Materials: Food, medicine and cosmetics industry as well as. Yogurt in the food and drink containers are examples.• the killing of bacteria.• Food industry and molds used to disinfect medical technologies.
 UV-assisted oxidation (water and air pollution causing Organics)
• The main components of ozone, CH compounds take the form H2O + CO2.• Dirty Water Resources (water tanks, the military, dirty floors, equipment locations, household gas, waste spills, and coal).• Industrial Waste Water (metal and processing industry, textile industry, paint, cosmetics, pharmaceuticals, chemicals, electronics industry, coal cleaning, factories, stores, car washes, paper and fiber board production, leather industry and dry cleaning).• Odor removing.Artificial Sun Rays: (artificial aging tests of materials, safety and aesthetic grounds)
• controlled aging in wood (guitar and violin production, furniture industry).• Any vehicle (airplane, helicopter, truck, automobile) test, the front windows.• testing of plastics in the automotive and other industries.• Protective (preservative) enumeration of the substance with the oxidation.• Water and waste water located in the ecologically harmful and harmless ingredients which allows for turning the biological ayrıştırmasının.Phase Photochemistry:
• Powder detergent, soap, and the production of the main components of synthetic fragrances.• Vitamin D synthesis.• Polymerisation.• Photobromination.• Photoclorination.• Photooxidation.UV analysis
Ozone Production
• Plastic and rubber materials, surface modification (tansiyonlarının the desired conditions for the configuration of the surface materials).• Waste water and exhaust air to the improvement.• The kitchens chimney and the enumeration of davlumbazlardaki oils.• Odor to help you troubleshoot.Medical Practice and light therapy
• vitamin D3 in improving etlikliyinin septomları seen.• improving psoriasis disease.• the treatment of jaundice in newborn babies.• identifying cancer cells in internal organs.• Solarium Centres.UV light excitation
• Money, stamps and other documents to control whether or not a fake.• Mail sorting machines.• Light effects.• Quality Control (fine cracks in the determination of the UV rays).• Forensic Medicine (murder crime scene evidence collection, evidence, finding that cause a fire).• Historic Buildings (in determining whether there is an authentic historical artifacts and artistic works).• biotechnology.• Geology (only a certain size, thick exposed to UV light shining in a different color to identify objects).

Read more »

Uv Curing Lamps

For every application and every kind of system, regardless of system size and the size of any UV Curing Lamp on a very short period of time are able to produce the highest quality standards. Our goal is not just to sell lamps, if examining the flaws in the actual service to help you troubleshoot your system after you have sold the lamp and lamp system with the high performance and long-term by providing the highest production costs to a minimum by reducing the speed to run efficiently and produce quality products and its customers happy by helping you get to contribute significantly. Please note that the electrical system is so inefficient to consume a UV lamp life of employees as well as the abridgement prints capture the vitality of your target, or some layers of paint is not enough strength in some cases no kuruyamamasına even if your materials or fumes can cause shrinkage. Due to repeat business with you when all is considered, the loss of late delivery of materials and labor, even in some cases could result in customer loss. Expert's eye can be very simple solutions to this undesirable situation, our company will be happy to assist you if you need to contact with. A more affordable price to provide higher performance and long-lasting lamp Do not you want? It used to send us an old lamp or get a quote button on our website by filling out the form and fill out the requested e-mail it to pass by us, as soon as possible under a 100% guarantee, the product is installed from the moment receive will show the difference in performance.

Read more »

Ultraviolet Lamps

Wavelength shorter than the human eye, but X-rays, visible rays longer than the ultraviolet rays called ultraviolet. Because the human eye can see the range of red and purple light

Utilized as a disinfectant, this special light, called the short-wavelength light or UV-C light.
This length of 200 nm light (nanometers) to 280 nm UV-C band enters.

253.4 nm wavelength, which is required for disinfection (0.0002534 mm) is. These lamps are used as a sterilizer yararlanılacakları media made ​​according to the application of different ways.

Bacteria, viruses, mold and fungus spores immediately neutralizes them by breaking the structure of DNA.
Between thymine molecules of DNA replication prevents the building were.

Effect of germicidal UV radiation in nature, dependent.
Beaming as the duration of the vegetative cell or irradiation intensity increases, so does the number who died.
The source is heated to a specific area microwatts of UV energy (uW) is measured.
Inactivation of microorganisms, the necessary energy and irradiation of UV light intensity is calculated by multiplying the surah (μW.saniye / cm 2).
The energy required for this inactivation is carried out for different microorganisms.

Read more »